Geekworm Raspberry Pi 5 PCIe to M2 NVME Board Installation Spacer Screw Set

Overview:

This kit mainly provides matching installation copper spacer and screw packages for various Raspberry Pi 5 PCIe to M.2 NVME shield;

This copper spacer includes four lengths of copper pillars with heights of 17mm, 15mm, 6mm, and 5mm; and some copper pillars provide both female/male and female/female options to facilitate your more flexible use (refer to the following packaging list )

For NVME boards that support 2280, the required installation height needs to be more than 16mm, so our list includes copper pillars with a height of 17mm;

For NVME boards that only support 2230/2242, a copper pillar with a height of 15mm is enough. Considering the installation of the radiator (such as Official Active cooloer or Argon THRML cooler), you cannot use shorter copper pillars because the radiator needs to reserve about 14mm high space.

If you need copper pillars of other lengths, please leave a message and tell us your reasons, we will be happy to help you.

Packing List:

• 8 x M2.5x17+6 Female / Male Spacer
• 8 x M2.5x17 Female / Female Spacer
• 8 x M2.5x15+6 Female / Male Spacer
• 8 x M2.5x15 Female / Female Spacer
• 8 x M2.5x6+5 Female / Male Spacer
• 8 x M2.5x5+5 Female / Male Spacer
• 8 x CM2.5*5 Screws