@li xia hello Could you tell what the GPIO5, GPIO12 and GPIO13 are used for? Thanks you.
Robert -
5
Posts
58
Profile views
0
Likes
0
Followers
Posts made by Robert -
-
Power off X728 after Pi4 was shut down from softwareposted in General Discussion
-
Power off X728 after Pi4 was shut down from softwareposted in General Discussion
I want to put the X728 into the same state as "Force shutdown (Press and hold for >8 seconds)" but after the Pi4 was powered off from software. How can I power off the X728 board after the Pi4 ...
-
X728 Pi4 RTC not workingposted in General Discussion
Apparenly on a freshly installed Ubuntu it works. Interesting...
-
X728 Pi4 RTC not workingposted in General Discussion
Tested on Raspberry OS lite. Seems to work. sudo hwclock -v hwclock from util-linux 2.33.1 System Time: 1608307733.168204 Trying to open: /dev/rtc0 Using the rtc interface to the clock...
-
X728 Pi4 RTC not workingposted in General Discussion
I purchased the X728 ups hat to be used with a Pi 4. I am having issues with RTC. I'm running Ubuntu Server 20.04. To rule out issues as my fault, here is what I did: - in /b...
