x-c1 script are now obsolete. Any solution are welcome.
JEAN-CLAUDE DOLE
6
Posts
35
Profile views
0
Likes
0
Followers
Posts made by JEAN-CLAUDE DOLE
-
/SYS/CLASS/GPIO does not exists anymore on last kernel 6.6 (2024-10-08)posted in General Discussion
-
PI 4B does not boot when mounted on NASPI Gemini 2.5 X882 v2.0posted in General Discussion
Geekworm device does not work. I need direction to make it running as expected.
-
PI 4B does not boot when mounted on NASPI Gemini 2.5 X882 v2.0posted in General Discussion
Finaly I put one hd disk into an sata to usb interface. I was able to do all the step of "How to Boot Raspberry Pi 4 / 400 From a USB SSD or Flash Drive" and boot my PI 4B from USB. Putting that d...
-
PI 4B does not boot when mounted on NASPI Gemini 2.5 X882 v2.0posted in General Discussion
How to Boot Raspberry Pi 4 / 400 From a USB SSD or Flash Drive : step 1-8 on PI 4B alone ( if not pi does not boot ) before step 9 : mount pi on x882 board and connect x882 to gpio step 9 : Into...
-
PI 4B does not boot when mounted on NASPI Gemini 2.5 X882 v2.0posted in General Discussion
PI 4B is configured to boot frolm SD card. During my test I detect than connecting GPIO to X882 prevent PI 4B from booting. Any direction is welcome. I am reading your recommendation, but ...
-
PI 4B does not boot when mounted on NASPI Gemini 2.5 X882 v2.0posted in General Discussion
Hello. Powered by geekworm 220v~/12v= 5A PI 4B is powered (red light on) Never boot (green light always off, never blink) Screen is black. Alone PI 4B run normally. Any help is urgent...
