The Raspberry Pi X730 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides intelligent and safe power management, safe shutdown and full poweroff through software, an automatic temperature controlled fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments.The X730 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
Key Features
About Power Management
- Intelligent and safe power management
- Press the power button to turn on
- Press the button and hold for 1~2seconds to reboot
- Press the button and hold for 3~7seconds for safe shutdown
- Press the button and hold for >8seconds to force shutdown
- Supports safe shutdown and full poweroff through software
- On-board LED shows the status of power on, reboot and shutdown
- Powers the Raspberry Pi via the 40-pin header - no additional cabling required
- Dual trip point temperature controlled cooling fan
- Auto-Control the fan for Cooling / quiet Operation
- Board tempeature <18℃ - Fan off
- Board tempeature >18℃ - Fan running low
- Board tempeature >38℃ - Fan running at full speed
- On-board LEDs show the status of fan running low and high
- No driver and setting required
- Reserved 40-pin stackable Header for Add-On Boards
- Works with all current models of the Raspberry Pi using a 40 pin header
- On-board micro-USB socket for power input - No need to change the power adapter
The Raspberry Pi X730 Power Management with Safe Shutdown and Auto Cooling Function Expansion Board for Raspberry Pi 3B+(plus) /3B can be used with Raspberry Pi X850 V3.0 USB 3.0 mSATA SSD Storage Expansion Board, now there is an HAT size acrylic case to install the kit, and the X850 metal case is not suitable for this Raspberry Pi X730 and X850 safeshutdown and storage expansion module.
Raspberry Pi X850 V3.0:
- Supports up to 1TB mSATA solid-state drive (SSD)
- Ideal storage solution for Raspberry Pi
- For Use With: Raspberry Pi 3 Model B+ / 3 Model B / 2B / B+
- Operating System: All Raspberry Pi operating systems
- Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac, When the X850 board is connecting with a mSATA SSD, user can use the USB3.0 cable to connect X850 board with a computer directly as a mobile hard disk.
- USB 3.1 Gen1（ Support USB 3.0） to SATA 6Gb/s Bridge Controller
- USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
- Bus powered, No additional AC adapter required
- Ultra compact size;HAT size, the same size as the Raspberry Pi motherboard;
- Solve the 'reboot' command problem when using the X850 as a bootable hard disk.
- X850 mSATA board can be mounted under the raspberry pi, the Raspberry Pi GPIO is available for use;