Note: The Raspberry Pi CM4, power adapter, antenna is not included in the packing list. Don't need to use additional SD card and power supply if you are using CM4 with...
Overview The Q100 is an expansion board similar to X1000. It has the function of PCIE to NVME ssd and also has an attached a 1.3" 240x240 Color TFT(ST7789 chipset),...
OverviewThis is a raspberry pi HDMI to CSI-2 Module with Toshiba TC358743XBG chip, HDMI input supports up to 1080p60fps. Model: C790. C790 is an upgraded version of C779, C790 has...
Update: update from X630 V1.3 to X630 V1.5 version in December 2022, just remove the DIP switch on the back of X630. The X630-C1 is out of stock!!! OverviewThe X630...
Overview: This kit mainly provides matching installation copper spacer and screw packages for various Raspberry Pi 5 PCIe to M.2 NVME shield;This copper spacer includes four lengths of copper pillars...
Note: The Raspberry Pi 5, M.2 NVME SSD is not included in the packing list. OverviewThe X1001 V1.1 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi...
Note: The Raspberry Pi 5, M.2 NVME SSD, SD card is not included in the packing list.OverviewThe X1002 V1.0 shield is a NVMe M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5...
According to the feedback, the issue of X1003 can't recognize or boot from SSD may lead by the FFC cable issue, we replace the old yellow FPC cable with white...
Note: The X1006 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Not compatible with M.2 NVMe SSDs, M.2 PCIe AHCI SSDs,...
Notes: The X1007 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Older SATA drives with less efficient flash media may...
Note: The X1008 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Please use DC 12V power adapter to power both...
Notes The X1009 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Don't power the X1009 via DC powe jack and...