2019 New Raspberry Pi X720 UPS HAT(18650 Power) + Safe Shutdown + Wake on Lan(WOL) + RTC Power Management Expansion Board
by Cindy Ding on January 18, 2019
The Raspberry Pi X720 is a multi-functional expansion board for all current models of the Raspberry Pi using 40 pin header. It provides intelligent and safe power management, remote power on/wake on Lan, safe shutdown and full poweroff through software, an advanced uninterruptible power supply, second 10/100M fast ethernet, and a real-time clock.
The X720 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X720 can also be used with the X820 (2.5" HDD/SSD Shield) and X850 (Msata SSD shield) for safe data backup.
Key Features
Smart Uninterruptible Power Supply (UPS)
Provides continuous operations for up to 10hours (depending on battery type used)
5.1V 3000mA Power Backup for even the most demanding Pi 3 set ups
18650 dual Cells Lithium Ion Holder
Can work with single or dual 18650 Lithium Ion battery
Integrated battery protection circuit
Integrated over current protection and over voltage protection
Intergrated Maxim's fuel-gauge systems (Reading battery voltage and precentage via i2c)
Intelligent automatic charging and discharging
Automatic safe shutdown when battery low (voltage <3.0V)
On-board LED blinking when the battery condition low (voltage <3.0V)
On-board LEDs show the status of battery charging and discharging
Intelligent and safe power management
Press the power button to turn on
Press the button and hold for 1~2seconds to reboot
Press the button and hold for 3~7seconds for safe shutdown
Press the button and hold for >8seconds to force shutdown
Supports safe shutdown and full poweroff through software
On-board LED shows the status of power on, reboot and shutdown
Integrated second 10/100M fast ethernet
Supports remote power on/wake on lan via Link-change, Magic packet, MS wakeup frame
On-board LED shows the status of power on/wakeup packet indication
Integrated Hardware Real Time Clock (RTC) with Battery Back-Up
Keeps track of the time while the Raspberry Pi is switched off
Allows the Raspberry Pi to retrieve the current date and time when it is switched back on
Uses the most precise DS3231 RTC real time clock
Uses the 18650 battery to maintain the date and time - no additioanl battery required
Reserved 40-pin stackable Header for Add-On Boards
Powers the Raspberry Pi via the 40-pin header - no additional cabling required
Works with all current models of the Raspberry Pi using a 40 pin header
Power management and second ethernet can still work without battery
On-board DC jack (5.5*2.5mm) and micro-USB socket convenient for power input
On-board connector allowing to connect external power switch and DIY your perfect case
Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X720 assembly
X720 RPi Desktop Computer Kit
Ultra-compact aluminum chassis
All ports and slots of the case can match with Raspberry Pi and X720 perfectly
Exhaust holes surface can reach perfect heat dissipation
Equipped with large power switch
All status LEDs still visible
Easy to change the Raspberry Pi OS SD card - No need to open the case
GPIO reference board included -Makes connecting wires to the Raspberry Pi GPIO incredibly easy
Grouped the GPIO pins into categories like I2C, IO, UART, SPI, and power.
