Geekworm NASPi Gemini 3.5 Dual 3.5'' SATA HDD NAS Storage Kit with DC 12V Voltage Input|Safe Shutdown|Auto Power On|RAID for Raspberry Pi 4

Note:

1. The script must be installed first for the product to work properly!!!
2. The Raspberry Pi board, power supply,HDD, SD card is not included in the packing list.

Overview
Geekworm NASPi-Gemini 3.5 is an ultra-compact dual 3.5 inch SATA HDD NAS storage kit for Raspberry Pi 4 8GB/4GB/2GB/1GB computer. The model name is NASPi Gemini 3.5.

NASPi-Gemini 3.5 with RAID, PWM fan, safe shutdown and auto power on function, it allows 2 pcs 3.5" HDDs/SSDs to working at the same time with your Raspberry Pi 4. Also support use with one single 3.5" SATA HDD.

NASPi-Gemini 3.5 is composed of 3 parts: X885 dual 3.5" SATA HDD shield, X885-C1 metal case and cooling solution X823-A3 (3Pin 4010 PWM fan with metal bracket).

User Manual

• https://wiki.geekworm.com/NASPi_Gemini_3.5
• Software guide: wiki.geekworm.com/X885-software
• PSU: wiki.geekworm.com/PSU60
• Installation Video: https://youtu.be/iifa9cTGqFM

How to Power

• Power supply: 12Vdc +/-5% , ≥5A, via DC 12V IN Port of X885
• Ports & Connectors: DC jack - 5.5x2.1mm
• Refer to https://geekworm.com/products/psu60

Warning about power supply:

1. Don't use that adjustable voltage power supply.
2. Don't use the same power supply used on LED strips.
3. Please use high quality power adapter, the low quality PSU may damage the X885 board and not recognized the HDD.

The above two are absolute garbage power supply, can not be used!!!

Features

• Ideal storage solution for Raspberry Pi 4 - Dual SATA Gen3 ports Shield
• Model: NASPi Gemini 3.5
• Create high performance storage with a dual SATA HDD RAID array through USB 3.1 (5Gbps)
• Supports Standard Desktop 3.5" SATA Hard Drives or SSD
• Supports SATA I, II and III and is enhanced with UASP to maximize the performance and speed of your SATA III drives
• Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)
• Supports hardware JBOD, RAID0(striping), RAID1(mirror), Normal mode
• Supports mode select via jumper setting
• LED blue indicator indicates each drive status
• Onboard push button to control power on, safe shutdown, reboot and force shutdown
• Supports full poweroff from software
• Onboard red LED shows the status of power on, reboot and shutdown
• Powers the Raspberry Pi via the 40pin header - no additional cabling required
• Onboard PH2.0 connectors for external switch and PWM cooling fan

Packing List

• 1 x X885 V1.1 Dual 3.5" SATA HDD Shield
• 1 x X885-C1 Metal Case
• 1 x 3pin 4010 PWM fan with metal bracket
• 1 x screws pack accessories