Geekworm X301 2.5" SATA HDD/SSD NAS Storage Expansion Board & USB HUB Compatible with Raspberry Pi Zero 2 W

Note: 

• X301 is not compatible with Raspberry Pi Zero/Zero W. (Since the X301 expands the Micro OTG port of the pi zero motherboard into a USB HUB, the Micro OTG port of the pi zero motherboard can no longer be used. )
• The Raspberry Pi Zero 2 W, SSD/HDD, power adapter is not included in the packing list.

Overview
The X301 is a 2.5-inch SATA HDD/SSD NAS storage expansion board designed for the Raspberry Pi Zero 2 W. The X301 is not compatible with Raspberry Pi Zero or Raspberry Pi Zero W/WH as Raspberry Pi Zero does not have wifi module.

Geekworm has provided X-series storage solutions for Raspberry Pi since 2017, our storage expansion boards have been continuously improved with the upgrade of Raspberry Pi. Many Geekworm users contacted us to inquire about the Pi Zero 2 W storage expansion board, that is why the X301 is born.

User Manual: wiki.geekworm.com/X301

Click to Order from Amazon

Features:

• Ideal storage solution for Raspberry Pi Zero 2 W - 2.5" SATA HDD/SSD Shield
• USB Hub for Raspberry Pi
• Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
• Supports Multiple Transaction Translators for optimum performance
• Powers the Raspberry Pi via Pogo Pins - no wiring & soldering required
• LED green indicates RPi activity status and LED blue indicates hard drive status
• Supports USB Attached SCSI Protocol (UASP)

How to Power:

• Power via USB Type-C 5V In port of X302
• Power supply requirement: 5Vdc +/-5% , ≥3A

Recommend to use Geekworm 20W 5V 4A USB Type-C Power Adapter: https://geekworm.com/products/20w-5v-4a-type-c-psu

How to Cool:

• Support to use with Geekworm C296 aluminum heatsink for Raspberry Pi Zero 2 W heat dissaption. (C296 also compatible with raspberry pi zero/raspberry pi zero w by using thermal pads of different thicknesses, thermal pads for raspberry pi zero / zero w is not included.)

Packing List:

• 1 x X301 V1.0 Expansion Board
• 4 x M2.5*12 mm F/F Spacers
• 4 x CM2.5*5mm Screws
• 2 x CM2.5*10mm Screws
• 2 x M3*5mm Screws (to fix HDD)