Raspberry Pi 4 X880 12V Dual SATA Gen3 HDD Shield Support Dual 2.5"/ 3.5" SATA HDD/SSD

This X880 USB 3 to dual SATA Gen3 ports shield makes it easy to add high-capacity, high-performance external data storage to your Raspberry Pi 4.

The dual SATA shield supports two 2.5" or 3.5" SATA hard drives with ultra-fast data transfer speeds and configurable RAID modes.

This dual SATA shield delivers fast file transfer rates up to 5Gbps with USB 3.1 Gen 1 performance. It supports SATA I, II and III and is enhanced with UASP to maximize the performance and speed of your SATA III drives.

The dual SATA shield provides an effective solution for Raspberry Pi 4 to store, access, back up, and protect important files.

X880

Application

X880 Features

• Ideal storage solution for Raspberry Pi 4 - Dual SATA Gen3 ports Shield
• Create high performance storage with a dual SATA HDD RAID array through USB 3.1 (5Gbps)
• Supports Standard Desktop 2.5"/3.5" SATA Hard Drives or SSD
• Supports hard drives up to 10TB
• Supports SATA I, II and III and is enhanced with UASP to maximize the performance and speed of your SATA III drives
• Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)
• Supports hardware JBOD, RAID0(striping), RAID1(mirror), Normal mode
• Supports mode select via jumper setting
• Plug-and-play, no drivers needed
• Powers the Raspbeerry Pi via test pins - Only one PSU required
• Specially-made USB3.1 jumper to connect with RaspberryPi - no additional cables needed
• LED blue indicator indicates each drive status
• Mounting holes and standoffs provide mechanicalstability of the RaspberryPi and X880 assembly
• Heat dissipation solution:We recommend use embedded radiator P165-A or P165-B
• Supports installation of X880-A1 A2 2.5 "/ 3.5" SATA SSD/HDD Shield

X880-A1-A2

The X880-A1-A2 add-on board is just an auxiliary board for easy installtion of 2.5" or 3.5" SATA  hard drives, the X880-A1-A2 boards have no function.

There are two SATA 7+15pin male to female HDD power extension cables included for you to connect the 2.5" or 3.5" SATA hard drives.

Matching Case for X880

Current there is no match case designed for the X880 shield, after the installation of X880+X880-A1-A2 shield, the kit will be big, so the case for it also will be a big one.

We will collect more feedback about the case requirement of X880.