Geekworm X302 HiFi DAC HAT Expansion Board & USB HUB Compatible with Raspberry Pi Zero 2W / Zero W

Note: the Raspberry Pi Zero 2W & Zero W is not included in the packing list.

Overview
The X302 HiFi DAC for Raspberry Pi Zero 2W/Zero W adds a high-quality sound to your Raspberry Pi.  It is designed for optimal sound output quality and the ideal HiFi solution for all Raspberry Pi Zero 2W & Zero W users that love music.
Onboard four USB2.0 ports for easy use of USB peripherals.
Easy to use & installation - The X302 connects directly to the Raspberry Pi Zero 2W & Zero W where no external cables are needed.
Compatible with C296 aluminum alloy heatsink to provide a cooling solution for your Raspberry Pi Zero 2W & Zero W.

User Manual: wiki.geekworm.com/X302

Click to Order from Amazon

Features

• Ideal HiFi audio solution for Raspberry Pi Zero W & Zero 2W
• Not compatible with Raspberry Pi Zero WH & 2WH (Zero with Headers)
• Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122)
• Full-HD audio – up to 24-bit/192kHz playback
• Dynamic range signal-to-noise ratio (SNR) up to 112dB, maximum distortion less than 0.0019%
• Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
• Built-in TI original high-quality headphone amplifier chip (TI TPA6133A)
• Uses the ultra-low-noise voltage regulator
• On-board RCA connectors - external audio equipment
• On-board 3.5mm stereo headphone jack - external headphones
• On-board four USB 2.0 Ports - No more external USB hub
• Gain 4 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps)
• Connects to the Raspberry Pi via Pogo Pins - no wiring & soldering required
• Compatible with C296 heatsink for heat dissaption

​Operating System

• Moode Audio Player
• OSMC
• Openelec
• Raspbian Jessie
• Volumio
• Max2Play
• Ropiee

How to Power:

• Power via USB Type-C 5V In port of X302
• Power supply requirement: 5Vdc +/-5% , ≥3A

Recommend to use Geekworm 20W 5V 4A USB Type-C Power Adapter: https://geekworm.com/products/20w-5v-4a-type-c-psu

How to Cool:

• Support to use with Geekworm C296 aluminum heatsink for Raspberry Pi Zero 2 W heat dissaption. (C296 also compatible with raspberry pi zero/raspberry pi zero w by using thermal pads of different thicknesses, thermal pads for raspberry pi zero / zero w is not included.)

Packing List:

• 1 x X302 V1.0 DAC Expansion Board
• 4 x KM2.5 x 5mm Screws