Geekworm T201 1-Cell 18650 UPS ( Max 5.1V 4A Output ) & Power Management Expansion Board for NVIDIA Jetson Nano

Note:

1. The Jetson Nano board & 18650 battery is not included in the packing list.
2. T201 is NOT compatible with J010 NANO 4.
3. T201 must be directly connected to Jetson Nano. If T201 does not detect Jetson Nano, it will turn off the power output after a few seconds.
4. AL ON means power always on. When use the exteral power switch, the "AL ON" pin on the T201 must be OPEN.

Overview
T201 is a compact one-cell 18650 UPS Shield specially designed for NVIDIA Jetson Nano Developer Kit, it provides smart and powerful uninterruptible power supply and safe power management for Jetson Nano 2GB/4GB.

User Manaul: https://wiki.geekworm.com/T201

Installation Video for T201&N100-V12: https://youtu.be/hjczsEjmSNY

Features

• Ideal Uninterruptible Power Supply (UPS) solution for Jetson Nano Developer Kit
• Max 5.1V 4000mA Power Backup for Jetson Nano
• With 18650 single cell battery holder
• Upto 1000mA charging current
• AC power loss & power adapter failure detection (LED & GPIO)
• Automatic powering off after system safe shutdown
• Integrated battery reverse polarity protection circuit
• Integrated over current protection and over voltage protection
• Intelligent automatic charging and discharging
• 4 blue LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
• Powers the Jetson Nano via the 40-pin header - no additional cabling required
• Reserves the 40-pin header that can be stacked with other accessory boards
• On-board press button to control power on /off
• Press the button to power on
• Press the button for 3 seconds to power off

How to Power

• Via DC 5521 power jack of T201: DC 5V±5%, ≥4A

Packing List

• 1x T201 V1.0 UPS Shield
• 3x M2.5x20mm F/F Spacers
• 6x M2.5x6mm Screws
• 1x Jumper link Pitch 2.54mm

FAQ
Which GPIO of Jetson Nano has been occupied by T201 UPS?
A: The GPIO4 has been occupied by T201, the rest GPIOs are available to use.