Geekworm Aluminum Alloy Passive Cooling Case for LattePanda 3 Delta

Note: the LattePanda 3 Delta board is not included in the packing list.

Overview
This is a aluminum alloy passive cooling case, which is specially designed for LattePanda 3 Delta by Geekworm. It is a passive heat dissipation case, so you don't need to use a fan to cool the motherboard and have to endure the noise of the fan. The case reserve all the interfaces and GPIO pins of LattePanda 3 Delta.
Aluminum alloy has excellent thermal conductivity. We use high-quality ShinEtsu X-23-7921-5 CPU silicone grease as the filling material for the housing and CPU. This ensures that heat is quickly transferred to the aluminum alloy housing.
Although passive heat dissipation is sufficient, the surface of the shell will be hot. So it is also possible to install a fan with a side length of 40 on the surface of the case to improve the heat dissipation capacity, but this is not required.You could use cooling fans like 4007, 4010, 4012 fan. The fan dimensions should be 40x40mm with 32±0.3mm hole, and it is recommended that you use M3 nylon plastic screws, and the length of the screw depends on the thickness of the fan you are using.

User Manual: wiki.geekworm.com/LP3_Case

Features

• Please remove the onboard cooling fan of LattePanda 3 Delta before installation
• Passive cooling aluminum alloy case with good heat dissipation
• All ports and slots of the case can match with LattePanda 3 Delta board well
• Four fan holes are reserved in the upper cover
• Smooth and straight aluminum material
• Reinforced aluminum material, lightweight and durable, long-lasting stainless
• Open case design, and don't need to worry it will effect wifi signal any more
• Equipped with silicone grease and thermal pad
• Size: 125*78*18.5mm / 4.92*3.07*0.73inch

Packing List

• 1 x Aluminum Alloy Case for LattePanda 3 Delta Board
• 1 x Thermal pad for M2 NVME SSD (Size:70*18*1T mm)
• 1 x Silicone grease