No Products in the Cart
Hello.
Powered by geekworm 220v~/12v= 5A
PI 4B is powered (red light on)
Never boot (green light always off, never blink)
Screen is black.
Alone PI 4B run normally.
Any help is urgently needed.
Hello.
Powered by geekworm 220v~/12v= 5A
PI 4B is powered (red light on)
Never boot (green light always off, never blink)
Screen is black.
Alone PI 4B run normally.
Any help is urgently needed.
PI 4B is configured to boot frolm SD card.
During my test I detect than connecting GPIO to X882 prevent PI 4B from booting.
Any direction is welcome.
I am reading your recommendation, but i will not boot from disk mounted on X882
How to Boot Raspberry Pi 4 / 400 From a USB SSD or Flash Drive :
step 1-8 on PI 4B alone ( if not pi does not boot )
before step 9 : mount pi on x882 board and connect x882 to gpio
step 9 : Into your Raspberry Pi, insert a micro SD card with Raspberry Pi OS and boot from micro SD to the desktop
pi does not boot !
Finaly I put one hd disk into an sata to usb interface. I was able to do all the step of "How to Boot Raspberry Pi 4 / 400 From a USB SSD or Flash Drive" and boot my PI 4B from USB.
Putting that disk in the X882 does not help me to boot from the NASPI Gemini 2.5 X882 v2.0.
Geekworm device does not work.
I need direction to make it running as expected.
