No Products in the Cart
Geekworm device does not work. I need direction to make it running as expected.
Geekworm device does not work. I need direction to make it running as expected.
Finaly I put one hd disk into an sata to usb interface. I was able to do all the step of "How to Boot Raspberry Pi 4 / 400 From a USB SSD or Flash Drive" and boot my PI 4B from USB. Putting that d...
How to Boot Raspberry Pi 4 / 400 From a USB SSD or Flash Drive : step 1-8 on PI 4B alone ( if not pi does not boot ) before step 9 : mount pi on x882 board and connect x882 to gpio step 9 : Into...
PI 4B is configured to boot frolm SD card. During my test I detect than connecting GPIO to X882 prevent PI 4B from booting. Any direction is welcome. I am reading your recommendation, but ...
Hello. Powered by geekworm 220v~/12v= 5A PI 4B is powered (red light on) Never boot (green light always off, never blink) Screen is black. Alone PI 4B run normally. Any help is urgent...