Note: The Raspberry Pi 5, M.2 NVME SSD is not included in the packing list. OverviewThe X1001 V1.1 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi...
According to the feedback, the issue of X1003 can't recognize or boot from SSD may lead by the FFC cable issue, we add one backup FFC cable in the X1003...
OverviewThis is new updated X862 V2.0 version from X862 V1.0. We solve the EMC interference issue between Raspberry Pi 4 and USB3.0 device.The X862 V2.0 M.2 NGFF SATA SSD Shield...
UPDATE Notification: 1. The X857 has been updated to X857 V2.0 from X857 V1.2 version in Febuary 2021. Some changes: We removed the DC JACK power socket of X857 V1.2,...
Overview: This kit mainly provides matching installation copper spacer and screw packages for various Raspberry Pi 5 PCIe to M.2 NVME shield;This copper spacer includes four lengths of copper pillars...
Note: This is just a four NVMe SSD NAS solution. DOES NOT support NVMe boot with the existing firmware, DON'T buy if you want boot Raspberry Pi 5 from NVMe...
Note: The Raspberry Pi 4, SSD, SD card and power adapter is not inlcuded in the packing list. Overview The X876 kit is a NUC-style NAS storage solution based on the...
Note: The Raspberry Pi 4 and NVMe M.2 SSD is not included in the packing list. As with all SSDs, new media must be formatted before use. SSDs use exceptionally...
Note: The Raspberry Pi 4, 3.5" HDD& PSU is not included in the packing list.OverviewThis X885 SuperSpeed USB to dual SATA Gen3 ports shield makes it easy to add high-capacity,...
Notes The X1009 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Don't power the X1009 via DC powe jack and...
Overview:The X863 is a new ultra-compact design M.2 NGFF SATA SSD expansion board which offers an easy and fast way to create storage solution for your Raspberry Pi 4 Model...
Note: The Raspberry Pi CM4, power adapter, antenna is not included in the packing list. Don't need to use additional SD card and power supply if you are using CM4 with...