No Products in the Cart
1) Can the input be switched thru a GPIO command (and not just ctrl-ctrl-x)? 2) Does the ATX control follow the selected input? 3) Can the ATX control be selected via GPIO? 4) Is the cable...
1) Can the input be switched thru a GPIO command (and not just ctrl-ctrl-x)? 2) Does the ATX control follow the selected input? 3) Can the ATX control be selected via GPIO? 4) Is the cable...
Is the P3 connector inside the X680 V1.2 connected to any of the GPIO pins on the PI? Also, does the IO12, IO14, and IO15 connect to the PI GPIO pins (I assume so, but I wanted to be sure). Is the...
