Note: The Raspberry Pi CM4, power adapter, antenna is not included in the packing list. Don't need to use additional SD card and power supply if you are using CM4 with...
Note: The X1008 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Please use DC 12V power adapter to power both...
Argon NEO 5 M.2 NVME Case further expands your Raspberry Pi 5 potential with included M.2 NVME Expansion Board support. Boot your Raspberry Pi 5 from an NVME M.2 Drive. Built-in HEATSINK for your M.2 NVME...
Update X882 V1.3 to X882 V2.0, remove the USB-C port on X882, and update DC 5V power in to wide voltage input DC6-18V power in. Note: For better system compatibility...
Note: The Raspberry Pi 5, Active Cooler or Power Adapter is not included in the packing list. User Manual: https://wiki.geekworm.com/X1010 OverviewThe X1010 PCIe FFC connector to standard PCIe x4 slot expansion...
OverviewThe new member of the Raspberry Pi storage expansion board family - X852 (Dual MSATA SSD Shield) is coming. It is ideal storage solution for Raspberry Pi 3B+/3B to support dual...
This is just a dual NVME SSD NAS solution. DOES NOT support NVMe boot with the existing firmware, DON'T buy if you want boot Pi 5 from NVME ssd now. Overview The...
Note: The Raspberry Pi 5, M.2 NVME SSD is not included in the packing list. OverviewThe M901 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi...
Note: The Raspberry Pi 5, SSD or power adapter is not included in the packing list.OverviewThe M300 V1.1 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry...
Note: X301 is not compatible with Raspberry Pi Zero/Zero W. (Since the X301 expands the Micro OTG port of the pi zero motherboard into a USB HUB, the Micro OTG...
Notes: The X1007 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Older SATA drives with less efficient flash media may...
Note: The X1006 is designed for data storage purposes and does not support booting from HDD/SSD with the existing firmware currently. Not compatible with M.2 NVMe SSDs, M.2 PCIe AHCI SSDs,...