{"product_id":"vx1uhd","title":"VX1UHD V-by-One to HDMI 2.0 Converter Board, 51-Pin Input, Up to 4K 60Hz, No Audio","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe VX1UHD converts V-by-One signals from compatible TV mainboards into HDMI output. It is designed for reusing mainboards from TVs with damaged screens and for compatible display signal conversion applications. The board features a 51-pin V-by-One input and a standard HDMI Type-A female output, supporting up to 4K at 60Hz. Verify the source connector, pinout and signal format before use. Compatibility cannot be determined from the TV brand or model alone.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e1. V-by-One to HDMI conversion for connecting a compatible TV mainboard to an HDMI display.\u003c\/p\u003e\n\u003cp\u003e2. HDMI 2.0 output supporting up to 4K at 60Hz. Actual output depends on the input signal.\u003c\/p\u003e\n\u003cp\u003e3. Configurable input with 4 or 8 lanes, 24- or 30-bit data and 1 or 2 partitions. Non-default formats require solder configuration as described in the supplier manual.\u003c\/p\u003e\n\u003cp\u003e4. Powered through the 51-pin display cable, typically at 10V or 12V. No separate power supply is needed when the source power and pinout are correctly matched.\u003c\/p\u003e\n\u003cp\u003e5. Compact 80 × 60 mm PCB with signal detection and MCU status indicators.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eItem\u003c\/td\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eVX1UHD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariant covered\u003c\/td\u003e\n\u003ctd\u003eDirect 4K output, no audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConversion direction\u003c\/td\u003e\n\u003ctd\u003eV-by-One input to HDMI output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput connector\u003c\/td\u003e\n\u003ctd\u003e51-pin FI-RE51S-HF-R1500 female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connector\u003c\/td\u003e\n\u003ctd\u003eHDMI Type-A female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI output\u003c\/td\u003e\n\u003ctd\u003eHDMI 2.0, up to 4K at 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput lanes\u003c\/td\u003e\n\u003ctd\u003e4 or 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput data width\u003c\/td\u003e\n\u003ctd\u003e24 or 30 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput partitions\u003c\/td\u003e\n\u003ctd\u003e1 or 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDefault input configuration\u003c\/td\u003e\n\u003ctd\u003e8 lanes, 30 bits, 1 partition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower source\u003c\/td\u003e\n\u003ctd\u003e51-pin display cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical supply voltage\u003c\/td\u003e\n\u003ctd\u003e10V or 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCB dimensions\u003c\/td\u003e\n\u003ctd\u003e80 × 60 mm, excluding connector protrusions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio\u003c\/td\u003e\n\u003ctd\u003eNot supported by the variant covered here\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal indicator\u003c\/td\u003e\n\u003ctd\u003eGreen when a V-by-One signal is detected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCU indicator\u003c\/td\u003e\n\u003ctd\u003eBlinks green while the MCU is operating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility and Setup\u003c\/h2\u003e\n\u003cp\u003eUse with a compatible mainboard, display cable and HDMI display.\u003c\/p\u003e\n\u003cp\u003eThe VX1UHD is not a 4K-to-1080p downscaler; a 4K input remains 4K after conversion, requiring a downstream display that accepts HDMI 2.0 4K input.\u003c\/p\u003e\n\u003cp\u003eThe default configuration is 8 lanes, 30 bits and 1 partition. Short P1\/R17 for 4 lanes, P2\/R18 for 24 bits, or P3\/R19 for 2 partitions, using a zero-ohm resistor or solder bridge as specified in the manual.\u003c\/p\u003e\n\u003cp\u003eSelect the 51-pin cable to match the TV mainboard connector. Type A uses a latch. For non-latching connectors, select Type B for a 27.5 mm plug width or Type C for 29.5 mm. Each kit includes one cable of the selected type.\u003c\/p\u003e\n\u003ch2\u003eCable Selection\u003c\/h2\u003e\n\u003cp\u003eSelect the cable to match the V-by-One output connector on the customer's TV mainboard. The converter board remains the VX1UHD no-audio version.\u003c\/p\u003e\n\u003cp\u003eType A: Latching plug for the corresponding latching connector. The reference image does not specify the Type A plug width.\u003c\/p\u003e\n\u003cp\u003eType B: Non-latching plug, 27.5 mm wide.\u003c\/p\u003e\n\u003cp\u003eType C: Non-latching plug, 29.5 mm wide.\u003c\/p\u003e\n\u003cp\u003eFirst check whether the connector uses a latching design. Compare a latching connector with Type A. For a non-latching connector, measure the original cable plug width and compare it with Type B or Type C.\u003c\/p\u003e\n\u003cp\u003eThe 27.5 mm and 29.5 mm measurements refer to plug width, not cable length. Physical fit alone does not confirm compatibility; also verify the 51-pin pinout, power supply and V-by-One signal format.\u003c\/p\u003e\n\u003cp\u003eIf unsure, provide clear photos of the mainboard connector and original cable plug, together with the measured plug width, for compatibility checking.\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cp\u003e1 × VX1UHD V-by-One to HDMI converter board (direct 4K output, no audio)\u003c\/p\u003e\n\u003cp\u003e1 × Type A 50-Pin Cable\u003c\/p\u003e\n\u003cp\u003e1 × Type B 50-Pin Cable\u003c\/p\u003e\n\u003cp\u003e1 × Type C 50-Pin Cable\u003c\/p\u003e\n\u003cp\u003eNo other accessories are included.\u003c\/p\u003e","brand":"Geekworm","offers":[{"title":"Default Title","offer_id":67969547469113,"sku":"200415","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0068\/8481\/9002\/files\/VX1UHD-front.jpg?v=1793938011","url":"https:\/\/geekworm.com\/products\/vx1uhd","provider":"Geekworm","version":"1.0","type":"link"}