For Raspberry Pi 4 M.2 NVMe SSD Shield, please refer to X872: https://geekworm.com/products/raspberry-pi-4-x872-m-2-nvme-2280-2260-2242-2230-ssd-expansion-board
The new member of the Raspberry Pi storage expansion board family - X870 (M.2 NVMe SSD) is coming.
This is the X870 NVMe M.2 SSD Storage Expansion Board, it provides a complete storage solution for Raspberry Pi or ROCK64. It supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230.
- Ideal storage solution for Raspberry Pi - M.2 NVMe SSD Shield
- Supports up to 2TB M.2 NVMe SSD solid-state drives
- Supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230
- Supports operating system installation and booting from your SSD
- Supports fastest OS image writing (>1Gb/S*) from a PC or a Mac
- Integrated USB 3.1 Gen2 to PCIe Gen3x2 10Gb/s bridge controller
- USB2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
- Quick file transfer with high-speed USB3.1 Gen1 5Gb/s or Gen2 10Gb/s connectivity from a PC or a Mac
- LED blue indicator indicates drive status
- On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 11.5Watts)
- USB bus-powered
- Specially-made short USB Type-C to USB-A 3.0 cable to connect with Raspberry Pi
- Fully compatible with X720, X730 and X735 for intelligent and safe power management
- PCB Size: 87mm x 56mm
- *Test condition: USB3.1 Gen 2 port, SSD sequential write speed >1000MB/s
- NVMe SATA SSD is not included
- Compatible with NVMe M.2 SSDs
- Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
- As with all SSDs, new media must be formatted before use
- Performance depends on host system, workload, and SSD media used
- SSDs use exceptionally high performance storage media that will run hot when under load
- Older SSD drives with less efficient flash media may not perform as well as newer drives
Power supply request
- 5Vdc +/-5% , Powered by Raspberry Pi
- Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient)
- 5Vdc via on-board micro-USB or XH2.5 2Pin connector
Matching Metal Case
Please refer to Raspberry Pi X850/X860/X870 Metal Case
Ports & Connectors
- USB socket - USB Type-C x 1
- Micro-USB SSD power socket x 1
- XH2.54 2P SSD power input port x 1
- 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1
X870 for Pi 3:
- 1 x X870 Board
- 1 x USB3.0 Type A to Type C cable(length: 10cm)
- 4 x Spacer F/F M2.5x8
- 4 x Spacer M/F2.5x12
- 4 x Screw M2.5x4
- 1 x Screwdriver
X872 for Pi 4:
- 1 x X872 M.2 NVME SSD shield (Not include the NVMe SSD)
- 1 x USB3.1 jumper / Connector
- 4 x Spacer M/F M2.5 x 12mm
- 4 x Spacer F/F M2.5 x 8mm
- 4 x Screw M2.5 x 6mm
- 1 x SSD screw kit
- All orders will be shipped within 48 hours on receipt of cleared payment on Woking Days. (From Moday to Friday in 24-48 hours as usual, Except for Chinese legal holidays or big holidays or Weekend)
- If you need faster shipment, please choose DHL or EMS or FedEx IP etc(Shipping fare paid by yourself). Or we will deliver via the default method of standard shipping.(Usually by China Post Registered Air Mail with tracking number if the order ammount is more than $9.99); Please contact us to calculate the shipping cost by faster shipping way like DHL, EMS or FedEx...
- Please make sure that your shipping address is 100% correct with full name and a right phone number included, the phone number is very important in the shipping address.
- We ship items to worldwide with delivery time guarantee. Please understand the unexpected delay during the international shipping.
- We usually declare a lower value for all orders to avoid the cutoms tax for our customers, but the buyer still need to do customs clearance themselves if it's a requirement by the destination country.
- If you didn't receive your product or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.
- We provide resend or refund or store coupons for the item you received was substantially different from the item represented on the product detail page.
- For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!
- It is better to reject the package if you find it obviously broken and ask for compensation from your local post office.
- We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.
- If buyer's reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.
- We will refund to buyer after we receive the return packages in its original condition package with no items missing. Or buyers could choose to have a replacement.
- We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.
Geekworm products on the website all support a wholesale price if you need large quantities. You can send us your enquiry by email: email@example.com about the item you need, item quantities, destination country of shipment. Then we will send you our lowest price according to item quantities, and the shipping cost also will be calculated according to the quantities you need.
Support dropshipping orders from all over the world.Please leave a note if you make a dropshipping order. We will not put anything related with our website into the parcel, please don't worry.