For Use With raspberry Pi 3 Model B / 2B / B+
(The Raspberry Pi 3 Model B Board is not included in the X4000K DIY Kits, if you need it please refer to here: Element 14 Raspberry Pi 3 Model B Board)
- Moode Audio Player - Supports X4000 HDMI audio and RPi i2s audio
- OSMC - Supports X4000 HDMI audio
- Openelec - Supports X4000 HDMI audio
- Raspbian Jessie - Supports X4000 HDMI audio
- Volumio - To be tested
- Rune audio - To be tested
- Pi Core Player - To be tested
- High-quality Burr-Brown DAC for best sound quality
- Use the ESS Technology flagship DAC chipset (ES9018K2M)
- 127dB DNR -120dB THD+N
- Used the Texas Instruments Burr-Brown OPA2604 low noise OP AMP
- Used the ultralow phase noise 100MHz HiFi TCXO
- Used the Texas Instruments ultra-low-noise voltage regulator
- Gold-plated RCA connectors
- Supports up to 1TB 2.5-inch SATA hard drives
- Selectable HDMI audio or Raspberry Pi i2S audio
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- High quality video performance
- 3.5mm analog stereo jack output
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi - no additional cables needed
- Can be used individually with only 3 wire I2S signal connected from other i2s interface
- Ultra-compact chassis
- Powers the Raspberry Pi - no additional power supply
- Lighted power switch
- Raspberry Pi status LEDs still visible
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Easy DIY with Raspberry Pi
- Power supply: +5Vdc +/-5%
- Input Ports: 1 x HDMI
- Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
- Output Ports: 1 x HDMI, 2 x RCA connectors, 1 x 3.5mm Phone Jack + Optical
- Analog audio output level: 2V RMS
- Resolution/Sampling Rate: upto 32bit / 384KHz (ES9018K2M)
upto 24bit / 192KHz (Raspberry Pi I2S)
upto 24bit / 192KHz (Optical S/PDIF Audio)
- Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
- Size 122mm x 90mm x 90mm
[Power Supply Unit (included)]
- AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU)
- For use with original power supply unit only
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
- Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed
(The powerful HDMI audio processing chipset needs time to bootup)
For more updated information and details, please refer to the official website:
- 1 x X4000 Metal Case
- 1 x X4000 Expansion Board Kit
- 1 x X800K HDD Expansion Board Kit
- 1 x Power adapter(with EU/US Plug, cable: 100cm)
- 1 x Install Screws pack
- All orders will be shipped within 48 hours on receipt of cleared payment on Woking Days. (From Moday to Friday in 24-48 hours as usual, Except for Chinese legal holidays or big holidays or Weekend)
- If you need faster shipment, please choose DHL or EMS or FedEx IP etc(Shipping fare paid by yourself). Or we will deliver via the default method of standard shipping.(Usually by China Post Registered Air Mail with tracking number if the order ammount is more than $9.99); Please contact us to calculate the shipping cost by faster shipping way like DHL, EMS or FedEx...
- Please make sure that your shipping address is 100% correct with full name and a right phone number included, the phone number is very important in the shipping address.
- We ship items to worldwide with delivery time guarantee. Please understand the unexpected delay during the international shipping.
- We usually declare a lower value for all orders to avoid the cutoms tax for our customers, but the buyer still need to do customs clearance themselves if it's a requirement by the destination country.
- If you didn't receive your product or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.
- We provide resend or refund or store coupons for the item you received was substantially different from the item represented on the product detail page.
- For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!
- It is better to reject the package if you find it obviously broken and ask for compensation from your local post office.
- We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.
- If buyer's reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.
- We will refund to buyer after we receive the return packages in its original condition package with no items missing. Or buyers could choose to have a replacement.
- We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.
Geekworm products on the website all support a wholesale price if you need large quantities. You can send us your enquiry by email: email@example.com about the item you need, item quantities, destination country of shipment. Then we will send you our lowest price according to item quantities, and the shipping cost also will be calculated according to the quantities you need.
Support dropshipping orders from all over the world.Please leave a note if you make a dropshipping order. We will not put anything related with our website into the parcel, please don't worry.