1. The raspberry pi board is not included in the packing list.
2. Don't not apply power to Raspberry Pi the Pi's Micro USB or Type-C power socket.
X765 Power over Ethernet (PoE) expansion board can make your project wiring a breeze - and best of all they work to connect any 802.3at/802.3af-capable router to your Raspberry Pi 3 Model B+ and Raspberry Pi 4 model B. You can now power your Raspberry Pi 4B/3B+ and other devices in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.
This is an economical, practical, high-performance, and reliable Isolated 5V 5000mA PoE+ expansion board with a variety of power output connectors based on IEEE 802.3at standard. It can divide power from a network cable, and can be used with any PoE/POE+ injector that is compatible with IEEE 802.3at /802.3af, and supply power for Raspberry Pi and other non-PoE network equipment.
Simply attach the standoffs in the four fixed holes of the expansion board, then connect to the Raspberry Pi's pin header using the specially-made daughter board. Once the board is connected, you can power your Pi through the RJ-45 network connector.
The X765 board is directly connected on top of the Raspberry Pi using the board GPIO header pins, and no wiring nor soldering is required, and duplicated the 40-pin header of the R-Pi in order to support existing expansion boards. X765 is fully compatible with Raspberry Pi 3B+ and Raspberry Pi 4 B.
[For Use with]
- Raspberry Pi 4 Model B
- Raspberry Pi 3 Model B+
- All Raspberry Pi operating systems
- IEEE802.3 AT Standard (backward compliant with 802.3af)
- Power Output: 5Vdc Max 5A
- Fully isolated switched-mode power supply
- Uses Texas Instruments' high-power, high-efficiency PoE interface PD and PWM controller
- Integrated Short Circuit Protection and Output Over Voltage Protection
- Supplies total 5 Amps regulated DC power and output via 3 XH2.54 connectors and 40-pin header
- Powers the Raspberry Pi via the 40-pin header - no additional cabling required
- Reserved 40-pin stackable Header for Add-On Boards
- Fully compatible with X820, X850, X860, X870, X822, X852, X825, X828, X855, X856, X857
- Mounting holes and standoffs provide mechanical stability of the RPi and X765 assembly
- Power input: 38~57Vdc
- Output voltage: 5Vdc +/-5%
- Output current: 4.8~5.5A (IEEE 802.3at), 2.5A (IEEE 802.3af)
- Efficiency: ≥ 80%
- Isolation: 1500V
- NOTE: Don't not apply power to Raspberry Pi the Pi's Micro USB or Type-C power socket.
- 1x X765 PoE+Expansion Board
- 1x Installation Screws Pack
- All orders will be shipped within 48 hours on receipt of cleared payment on Woking Days. (From Moday to Friday in 24-48 hours as usual, Except for Chinese legal holidays or big holidays or Weekend)
- If you need faster shipment, please choose DHL or EMS or FedEx IP etc(Shipping fare paid by yourself). Or we will deliver via the default method of standard shipping.(Usually by China Post Registered Air Mail with tracking number if the order ammount is more than $9.99); Please contact us to calculate the shipping cost by faster shipping way like DHL, EMS or FedEx...
- Please make sure that your shipping address is 100% correct with full name and a right phone number included, the phone number is very important in the shipping address.
- We ship items to worldwide with delivery time guarantee. Please understand the unexpected delay during the international shipping.
- We usually declare a lower value for all orders to avoid the cutoms tax for our customers, but the buyer still need to do customs clearance themselves if it's a requirement by the destination country.
- If you didn't receive your product or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.
- We provide resend or refund or store coupons for the item you received was substantially different from the item represented on the product detail page.
- For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!
- It is better to reject the package if you find it obviously broken and ask for compensation from your local post office.
- We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.
- If buyer's reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.
- We will refund to buyer after we receive the return packages in its original condition package with no items missing. Or buyers could choose to have a replacement.
- We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.
Geekworm products on the website all support a wholesale price if you need large quantities. You can send us your enquiry by email: email@example.com about the item you need, item quantities, destination country of shipment. Then we will send you our lowest price according to item quantities, and the shipping cost also will be calculated according to the quantities you need.
Support dropshipping orders from all over the world.Please leave a note if you make a dropshipping order. We will not put anything related with our website into the parcel, please don't worry.