[Overview]
1. ESP32 is a complete,small form factor(SFF)802.11 b/g/n/e/i(2.4GHz)WLAN plus BT4.2combo solution optimized for low-power,mobile consumer electronics,wearable and Internet of Things(IOT) devices.ESP32 integrates all WLAN and BT functionality in a single package to support a low cost,layout-friendly implementation while allowing flexibility for platform specific customization.
2. ESP32 is a highly integrated solution with less than 10 external components.
3. ESP32 integrates the transmit /receive RF functionality including the antenna switches,RF banal,power amplifier, low noise receive amplifier,filters,power management,and advanced calibration circuitries that allow the solution to dynamically adjust itself to adapt to external circuit inflections.
4. The entire solution reduces Printed Circuit Board (PCB) area,time-to-market,and bill-of-material(BOM)costs while adding capabilities and processing power.the mass production of ESP32 does not require expensive and specialized Wi-Fi test equipment.
5. ESP32’s ultra low power consumption radio architecture and proprietary power save technologies extend batter life in real-world applications,using the following features:
- a. Fine granularity clock-gating
- b. Multiple low-power modes
- c. Dynamic voltage scaling
For instance,in a low-power IoT sensor hub application scenario,ESP32 is woken up periodically and only when a specified condition is detected;low duty cycle is used to minimize the amount of energy that the chip expends.The output power of the power amplifier can also be adjusted,so that an optimal trade off between the communication range,data rate and power consumption is achieved.
[Basic Features]
- Wi-Fi
- 802.11 b/g/n/e/I
- 802.11 n (2.4Ghz), up to 150Mbps
- 802.11 I security features: Per-authentication and TSN
- 802.11 e:Multiple queue management to fully utilize QoStraffic prioritization
- Wi-Fi Protected Access (WPA)/WPA2
- Wi-Fi Protected Setup(WPS)
- A- MPDU and A-MSDU aggregation
- Fragmentation and defragmentation
- SSL stacks with hardware accelerators
- Automatic beacon monitoring / scanning
- Infrastructure BSS Station mode/ Soft AP mode
- Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
- UMA compliant and certified
- Antenna diversity and selection
- WMM power save U-APSD
[Bluetooth]
- CMOS single-chip fully-integrated radio and baseband
- Bluetooth Piconet and Scatter net
- Bluetooth 4.2(BR/EDR/BLE)
- Adaptive Frequency Hopping(AFH)
- SMP
- Class-1 ,class-2 and class-34 transmitter without external power amplifier
- +10 dBm transmitting power
- NZIF receiver with-90 dBm sensitivity
- Up-to 4 Mbps high speed UART HCI
- SDIO/SPI HCI
- Low power consumption
- Minimum external component
[CPU and Memory]
- Xtensa®Dual-core32-bit LX6 microprocessors,up to 400 MIPS
- 128 KB ROM
- QSPI Flash/SRAM,up to 4x 16 MB
- Power supply: 2.5V to 3.6V
- 416 KB SRAM
[Clocks and Timers]
- 2 MHz to 40 MHz crystal oscillator
- Internal 8 MHz oscillator with calibration
- External 32kHz oscillator for RTC with calibration
- Internal RC oscillator with calibration
- Two timer groups including 3x64-bit timer and 1x watchdog in each group
- RTC timer with sub-second accuracy
- RTC watchdog
[Advanced Features]
- Advanced Peripheral Interfaces
- 12-bit SAR ADC up to 16 channels
- 2x10-bit DA converters
- 10x touch sensors
- Temperature sensor
- 4sSPI
- 2xI2S
- 2xI2C
- 2xUART
- 1 host(SD/eMMC/SDIO)
- 1 slave(SDIO/SPI)
- Ethernet MAC interface with dedicated DMA and IEEE 1588 support
- CAN 2.0
- IR(TX/RX)
- Motor PWM
- LED PWM up to 16 channels
[Security]
- IEEE 802.11 standard security features all supported,including WFA,WPA/WPA2 and WAPI
- Secure boot
- Flash encrypt
- 1014-bit OTP,up to 768-bit for customers
- Crytographic hardware acceleration:
- AES 128/192/256
- HASH(SHA-2)library
- RSA
- Random Number Generato
[Applications]
Generic low power:
- IOT sensor hub
- IOT loggers
Audio & Video
- Internet music players
- Audio headsets
- Wi-Fi + Bluetooth audio streaming devices
- Video Steaming from camera
Wi-Fi + Bluetooth enabled
Over The Top (OTT) devices
Smart devices
Wi-Fi enabled
Loggers toys
- Proximity sensing toys
- Speech recognition devices
Home automation
- Smart plugs
- Smart lightings
Industrial automation
- Industrial wireless control
- Mesh network
Security ID tags
Sensor network
- Wi-Fi location-aware devices
- Wearable electronics
- Baby monitors
Health care
- Proximity movement monitoring
- Trigger devices
- Temperature sensing loggers
Development Support:
- Firmware and SDK for fast on-chip Programming
- Open source tool chains based on GCC
[Shipping]
- All orders will be shipped within 48 hours on receipt of cleared payment on Woking Days. (From Moday to Friday in 24-48 hours as usual, Except for Chinese legal holidays or big holidays or Weekend)
- We ship the orders from China, now due to the impact of COVID-19, all the shipping way will have delay include fast shipping way like DHL, the delivery delay is really out of our control, hope to get your understanding and patience.
- If you need faster shipment, please choose DHL or EMS or FedEx IP etc(Shipping fare paid by yourself). Or we will deliver via the default method of standard shipping.(Usually by China Post Registered Air Mail with tracking number if the order ammount is more than $9.99); Please contact us to calculate the shipping cost by faster shipping way like DHL, EMS or FedEx...
- Please make sure that your shipping address is 100% correct with full name and a right phone number included, the phone number is very important in the shipping address.
- We ship items to worldwide with delivery time guarantee. Please understand the unexpected delay during the international shipping.
- We usually declare a lower value for all orders to avoid the cutoms tax for our customers, but the buyer still need to do customs clearance themselves if it's a requirement by the destination country.
[Return & Refund Policy]
- If you didn't receive your product after 6 months or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.
- We provide resend or refund or store coupons for the item you received was substantially different from the item represented on the product detail page.
- For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!
- It is better to reject the package if you find it obviously broken and ask for compensation from your local post office.
- We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.
- If buyer's reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.
- We will refund to buyer after we receive the return packages in its original condition package with no items missing. Or buyers could choose to have a replacement.
- We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.
- As our products belongs to DIY products, it really need some DIY skills and professional knowledge, also there will be the risk of failure for your DIY projects which may cause your loss such as one or two device burnt or defective due to not proper operation.
We can be reponsible for exchange new one or repair for the defective products which you bought from us, but you must send back us the defective product to us and also pay for the return shipping cost. The buyer must bear the shipping cost of return for exchange.
We only accept to exchange after we get the defective products received. As it is international shipping, it usually will take a longer time for your return package, please understand about this.
Wholesale
Geekworm products on the website all support a wholesale price if you need large quantities. You can
send us your request about the item you need, item quantities, destination country of shipment. Then we will send you our lowest price according to item quantities, and the shipping cost also will be calculated according to the quantities you need.
Dropshipping
Support dropshipping orders from all over the world. Please leave a note if you make a dropshipping order. We will not put anything related with our website into the parcel, please don't worry.
