The new member of the Raspberry Pi storage expansion board family - X860 (M.2 NGFF SATA) is coming.
This is the X860 M.2 NGFF SATA SSD Storage Expansion Board, it provides a complete storage solution for Raspberry Pi . It supports multiple M.2 NGFF SATA SSD lengths including: 2280, 2260, 2242, 2230.
- Ideal storage solution for Raspberry Pi -M.2 NGFF SATA SSD Shield
- Supports up to 2TB m.2 NGFF SSD solid-state drive
- Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230
- Supports operating system installation and booting from your SSD
- Supports faster OS image writing (>300Mb/S*) from a PC or a Mac
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
- USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
- Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac
- USB bus-powered
- LED blue indicator indicates drive status
- Specially-made USB3.0 connector?to connect with Raspberry Pi - no additional cables needed
- On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 6.6Watts)
- Fully compatible with X720,?X730?and?X735?for intelligent and safe power management
- PCB Size: 87mm x 56mm
- USB3.1 Gen 1 port, SSD sequential write speed >300MB/s
- NGFF SATA SSD is not included
- Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
- As with all SSDs, new media must be formatted before use
- Performance depends on host system, workload, and SSD media used
- SSDs use exceptionally high performance storage media that will run hot when under load
- Older SSD drives with less efficient flash media may not perform as well as newer drives
- We only test it on Raspberry Pi, not test on the Rock64; But in fact, Rock64 can fully play the performance of USB3 since Rock64 with USB 3.0;
Power Supply Request
- 5Vdc +/-5% , Powered by Raspberry Pi
- Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient)
- 5Vdc via on-board micro-USB or XH2.5 2Pin connector
Matching Metal Case
Please refer to Raspberry Pi X850/X860/X870 Metal Case
- USB socket - USB 3.0 type A x 1
- Micro-USB SSD power socket x 1
- XH2.54 SSD power input port x 1
- 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1
Only X860 Board
- 1 x X860 Board
1 x USB3.0 Connector
1 x USB 3.0 A-Male to A-Male Data cable
4 x Spacer F/F M2.5x8
4 x Spacer M/F2.5x12
4 x Screw M2.5x6
1 x Screwdriver
Only X860 Case
- 1 x Metal Case for X860
- 1 x Cooling Fan
- 1 x Power Control Switch(Only useful when use with X735 board)
- 1 x Screws Pack
- All orders will be shipped within 48 hours on receipt of cleared payment on Woking Days. (From Moday to Friday in 24-48 hours as usual, Except for Chinese legal holidays or big holidays or Weekend)
- If you need faster shipment, please choose DHL or EMS or FedEx IP etc(Shipping fare paid by yourself). Or we will deliver via the default method of standard shipping.(Usually by China Post Registered Air Mail with tracking number if the order ammount is more than $9.99); Please contact us to calculate the shipping cost by faster shipping way like DHL, EMS or FedEx...
- Please make sure that your shipping address is 100% correct with full name and a right phone number included, the phone number is very important in the shipping address.
- We ship items to worldwide with delivery time guarantee. Please understand the unexpected delay during the international shipping.
- We usually declare a lower value for all orders to avoid the cutoms tax for our customers, but the buyer still need to do customs clearance themselves if it's a requirement by the destination country.
- If you didn't receive your product or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.
- We provide resend or refund or store coupons for the item you received was substantially different from the item represented on the product detail page.
- For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!
- It is better to reject the package if you find it obviously broken and ask for compensation from your local post office.
- We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.
- If buyer's reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.
- We will refund to buyer after we receive the return packages in its original condition package with no items missing. Or buyers could choose to have a replacement.
- We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.
Geekworm products on the website all support a wholesale price if you need large quantities. You can send us your enquiry by email: firstname.lastname@example.org about the item you need, item quantities, destination country of shipment. Then we will send you our lowest price according to item quantities, and the shipping cost also will be calculated according to the quantities you need.
Support dropshipping orders from all over the world.Please leave a note if you make a dropshipping order. We will not put anything related with our website into the parcel, please don't worry.