NVIDIA Jetson Nano 18650 UPS HAT Shield, T200 Power Management Board is a 18650 UPS HAT shield for NVIDIA Jetson Nano Developer Kit, it provides smart and powerful uninterruptible power supply and Safe power management for Jetson Nano.
With 18650 four Cells Lithium Ion Holder, T200-A1 is a Ideal solution to increase battery capacity, on-board XH2.54 connectors connecting to T200 and one more T200-A1 - No complex cabling required. Please note that T200-A1 can only be used together with T200, it is no use with only T200-A1 board.
- · Smart and powerful Uninterruptible Power Supply (UPS)
- · Provides continuous operations for up to 10~30hours (depending on battery type and qty used)
- · Max 5.1V 8000mA Power Backup for even the most demanding Jetson Nano set ups
- · 18650 four Cells Lithium Ion Holder
- · Can work with two or three or four 18650 Lithium Ion batteries
- · Can work with T200-A1 battery stackable board - total battery capacity up to 38400mAh (12 18650 batteries)
- · Supports 2A via micro-USB socket or 3A via DC jack fast charging
- · Integrated battery protection circuit
- · Integrated over current protection and over voltage protection
- · Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c) - Cabling required
- · Integrated TI's 10-A fully-integrated synchronous boost converter
- · Intelligent automatic charging and discharging
- · On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
- · On-board blue LED show the status of power on/off
Safe power management
- · On-board push button to control power on /off (Press-ON, Hold the button pressed at least 3s -OFF)
- · Automatic powering off when system shutdown
- · On-board pin header to enable auto power-on when power supplied or battery installed
- · Ultra-low standby power consumption of μA to maximize battery life
- · Operate in both charge mode and boost mode to allow full system management and battery power management
- · Advanced system power path management avoids frequent charging and extend battery life
- · Advanced system power path management allows 3A fast charging and powering Jetson Nano at the same time
- · Powers the Jeton Nano via the onboard DC jack - Specially-made short DC cable supplied
- · On-board DC power jack (5.5*2.5mm) and XH2.54 connector convenient for power input
- · On-board PH2.0 connector allows to connect external power switch and DIY your perfect case
- · On-board XH2.54 power output connectors allow to power other devices
- · Mounting holes and standoffs provide mechanical stability of the Jetson Nano and T200 assembly
- 18650 four Cells Lithium Ion Holder
- Ideal solution to increase battery capacity (total battery capacity up to 38400mAh, 12 18650 batteries)
- On-board XH2.54 connectors connecting to T200 and one more T200-A1 - No complex cabling required
- Integrated battery protection circuit
- Mounting holes and standoffs provide mechanical stability of the Jetson Nano, T200 and T200-A1 assembly
- · Power supply via Micro-USB socket: 4.7~5.5Vdc, 2.5A; Via DC power jack: 4.7~5.5Vdc ±5%, ≥4A
- · UPS output : 5.1V ±5% Max 8A
- · UPS charging current: 2A via Micro-USB socket, 3A via DC jack
- · Terminal Battery Voltage : 4.2V
- · Recharge Threshold : 4.1V
- Power path management only enabled when applying power to the DC power jack
- Do not apply power to your Jetson Nano via the Micro USB socket.
- Do not use 18650 battery with built-in protection circuit
- T200-A1 can only be used together with T200, it is no use with only T200-A1 board.
- There are several variants, please note that the order item is shipped according to what you have ordered.
T200 Packing List
- 1 x T200 18650 UPS&Power management Board
- 1 x DC 55*21 cable Male to Male 15cm
- 1 x USB 3.0 A-Male to A-Male Data cable
- 2 x Jumper Cap
- 1 x Screws Pack
T200-A1 Packing List
- 1 x T200-A1 add-on Board
- 1 x 2 Pin Power Cable
- 1 x Screws Pack
WIKI for reference: raspberrypiwiki.com/index.php/T200
SAFETY INSTRUCTIONS AND WARNINGS
- You must read these safety instructions and warnings before charging your batteries.
- Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
- Do not mix and use old batteries and new batteries, or batteries with different brand names.
- Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
- When charging Battery Pack, please put battery in a fire proof container. Please don't leave the T200 on the wood material or carpet and unattended.
- Must keep the T200 away from children.
- All orders will be shipped within 48 hours on receipt of cleared payment on Woking Days. (From Moday to Friday in 24-48 hours as usual, Except for Chinese legal holidays or big holidays or Weekend)
- If you need faster shipment, please choose DHL or EMS or FedEx IP etc(Shipping fare paid by yourself). Or we will deliver via the default method of standard shipping.(Usually by China Post Registered Air Mail with tracking number if the order ammount is more than $9.99); Please contact us to calculate the shipping cost by faster shipping way like DHL, EMS or FedEx...
- Please make sure that your shipping address is 100% correct with full name and a right phone number included, the phone number is very important in the shipping address.
- We ship items to worldwide with delivery time guarantee. Please understand the unexpected delay during the international shipping.
- We usually declare a lower value for all orders to avoid the cutoms tax for our customers, but the buyer still need to do customs clearance themselves if it's a requirement by the destination country.
- If you didn't receive your product or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.
- We provide resend or refund or store coupons for the item you received was substantially different from the item represented on the product detail page.
- For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!
- It is better to reject the package if you find it obviously broken and ask for compensation from your local post office.
- We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.
- If buyer's reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.
- We will refund to buyer after we receive the return packages in its original condition package with no items missing. Or buyers could choose to have a replacement.
- We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.
Geekworm products on the website all support a wholesale price if you need large quantities. You can send us your enquiry by email: email@example.com about the item you need, item quantities, destination country of shipment. Then we will send you our lowest price according to item quantities, and the shipping cost also will be calculated according to the quantities you need.
Support dropshipping orders from all over the world.Please leave a note if you make a dropshipping order. We will not put anything related with our website into the parcel, please don't worry.