Overview The X825 expansion board provides a complete storage solution for newest Raspberry Pi 4 Model B, it supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 Board; It is updated from Raspberry Pi 3B+/3B X820 V3.0 2.5 inch SATA SSD expansion board. (Please refer to X820 if you want use the 2.5 inch SATA SSD on raspberry pi 3b+/3b/2b)
Supports upto 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) (Theoretically it can work with 6TB or 8TB as well. But actually we do not test the X825 board with 6tb or 8tb HDD, you can have a try.)
Ideal storage solution for Raspberry Pi 4 Model B
On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)
Powers the Raspberry Pi via Pi's 40-pin header
LED red indicator indicates powered status and blue indicator indicates drive status
USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller
Quick file transfer with high-speed USB 3.1 connectivity from a PC or a Mac
Powers the Raspberry Pi - no additional power supply for RPi 4
Power supply: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output
DC Power Plug Size : 5.5*2.5mm
Important Note: Please use high quality DC 5V 4A power supply, the best choice is to buy the DC 5V 4A power supply that Geekworm provided. If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD.
Match Metal Case(X825-C6&X825-C7)
A metal case with power control switch and super mute cooling fan, it is a perfect choice for X825 V1.5 SSD/HDD storage board user. It also support to install the X735 Auto Cooling & safe shutdown board over Raspberry Pi 4. We call it honeycomb chassis. Also it updated to supportMax 15MM thicknessbig capacity 2.5 inch SATA HDD/SSD
Note:Because we found that USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So if you find the 2.4G signal is unstable, please try to use WIFI 5G AP. (Please refer to: raspberrypiwiki.com/X825#Document)
We think this is caused by the unreliability of the Raspberry Pi's wifi design. If the Raspberry Pi Foundation reserves the SMA IPEX antenna interface, everything will become easier. We will also struggle to solve this issue in the future.
Only X825 Board:
1 x X825 V1.5 Expansion Board
1 x USB 3.1 connector
1 x 2 Pin Power Connection Wire(Cable: 12cm/4.72inch)
1 x Mounting screws pack
Only X825-C6 Case:(support X735 Only)
1 x X825-C6 Metal Case
1 x Power Control Switch
1 x4010Cooling Fan (Noise: 18dB)(with 4 pieces of screws)
Only X825-C7 Case:(support X708/U100/X735)
1 x X825-C7 Metal Case
1 x Power Control Switch
1 x5010Cooling Fan (Noise: 18dB)(with 4 pieces of screws)
The Raspberry Pi 4B and the 2.5" SATA SSD and power supply are not included in the packing List.
There are several variants of X825, the order is shipped according to what you ordered.
If you order the kit and need UK power supply, please leave a message.
All orders will be shipped within 48 hours on receipt of cleared payment on Woking Days. (From Moday to Friday in 24-48 hours as usual, Except for Chinese legal holidays or big holidays or Weekend)
We ship the orders from China, now due to the impact of COVID-19, all the shipping way will have delay include fast shipping way like DHL, the delivery delay is really out of our control, hope to get your understanding and patience.
If you need faster shipment, please choose DHL or EMS or FedEx IP etc(Shipping fare paid by yourself). Or we will deliver via the default method of standard shipping.(Usually by China Post Registered Air Mail with tracking number if the order ammount is more than $9.99); Please contact us to calculate the shipping cost by faster shipping way like DHL, EMS or FedEx...
Please make sure that your shipping address is 100% correct with full name and a right phone number included, the phone number is very important in the shipping address.
We ship items to worldwide with delivery time guarantee. Please understand the unexpected delay during the international shipping.
We usually declare a lower value for all orders to avoid the cutoms tax for our customers, but the buyer still need to do customs clearance themselves if it's a requirement by the destination country.
[Return & Refund Policy]
If you didn't receive your product after 6 months or it is significantly different to the description, we guarantee to resend new or refund your payment. But due to the shipping delays of international shipment, we hope to get your understanding and wait for some more time.
We provide resend or refund or store coupons for the item you received was substantially different from the item represented on the product detail page.
For the item you received was damaged or defective,please take photos of original package with shipping labels, package weight, package items details as proof to send us to find solutions,thank you!
It is better to reject the package if you find it obviously broken and ask for compensation from your local post office.
We accept any unused item in its original package as return within 7 days of delivery. Buyers must pay for the return shipping fee, provide the tracking number, specific reason for the return.
If buyer's reason lead to the return package due to fail delivery in destination country, the buyers need to pay for resend shipping fee and we deduct shipping fee before issue refund.
We will refund to buyer after we receive the return packages in its original condition package with no items missing. Or buyers could choose to have a replacement.
We accept to refund or resend new for our customers as product quality problem. But for the product value above $30, buyer must return the product to get a refund, the return shipping cost should be negotitated between the buyer and seller as this is a international shipping.
As our products belongs to DIY products, it really need some DIY skills and professional knowledge, also there will be the risk of failure for your DIY projects which may cause your loss such as one or two device burnt or defective due to not proper operation.
We can be reponsible for exchange new one or repair for the defective products which you bought from us, but you must send back us the defective product to us and also pay for the return shipping cost. The buyer must bear the shipping cost of return for exchange.
We only accept to exchange after we get the defective products received. As it is international shipping, it usually will take a longer time for your return package, please understand about this.
Geekworm products on the website all support a wholesale price if you need large quantities. You can send us your request about the item you need, item quantities, destination country of shipment. Then we will send you our lowest price according to item quantities, and the shipping cost also will be calculated according to the quantities you need.
Support dropshipping orders from all over the world. Please leave a note if you make a dropshipping order. We will not put anything related with our website into the parcel, please don't worry.
The X825 2.5 inch SATA HDD/SSD Shield has V1.5 and V2.0 version, X825-C6 for X825 V1.5, X825-C8 for X825 V2.0. WiKi for reference: X825-C7: https://wiki.geekworm.com/X825-C7 X825-C6: https://wiki.geekworm.com/X825-C2_Case OverviewThis is a metal case with...