Choose the Proper Geekworm Raspberry Pi 4 Cases for Your Raspberry Pi 4 Model B Computer

Choose the Proper Geekworm Raspberry Pi 4 Cases for Your Raspberry Pi 4 Model B Computer

The Raspberry Pi ranks as arguably the most popular single-board computer (SBC).  The Raspberry Foundation has just released its newest single board computer iteration, the Raspberry Pi 4 Model B tiny computer.

Raspberry Pi 4 Model B

Raspberry pi 4 model B

Raspberry Pi 4
Your tiny, dual-display, desktop computer
…and robot brains, smart home hub, media centre, networked AI core, factory controller, and much more.

Since the release of Raspberry Pi 4 Computer Model B, Geekworm start to get a lof of requirement of Raspberry Pi 4 cases.

After intensive prepare, design and produce, first we need to get a new Raspberry Pi 4 Model B, it takes some time. Ater get the Pi 4 computer, the case design and production is go-ahead one by one step.

Now Geekworm has released several Raspberry Pi 4 cases, included acrylic case and aluminum alloy metal case for Raspberry Pi 4B.

First, it is the most popular Raspberry Pi armor case, the provious version is only suitable for Raspberry Pi 3 Model B+ (Plus) and Raspberry Pi 3 Model B. So the Raspberry Pi armor case has been updated to be compatible with Raspberry Pi 4 Model B.

There are two versions of Raspberry Pi 4 Armor Case: without fan version and with dual fan version to meet different requirements.This is an armor aluminum alloy case designed for the Raspberry Pi 4 computer model b, so this Pi 4 armor aluminum alloy case is only fit to raspberry pi 4 model b motherboard. 

With ultra-thin design, very easy to install, fast Heat dissipation, smooth and straight aluminum material.
All ports and slots of the case can match with Raspberry Pi 4 Computer Model B perfectly
Open case design, you don't need to worry it will effect wifi signal any more
Reinforced aluminum material, lightweight and durable, long-lasting stainless

Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Case Protective Shell Metal Enclosure For Raspberry Pi 4 B Only

Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Case Protective Shell Metal Enclosure For Raspberry Pi 4 B Only

For the Pi 4 Armor Case with Dual Fan version:
Low Power Consumption Design
Dual Cooling Expericnce, More powerful heat dissipation
Very Quiet Cooling Fan, get rid of the fan noisy
All of the fans were Tested by Our Engineer, Very Nice Quality Control
Update Thermal Tape Can Make Sure Best Heat Conduction Effect
Fan Noise: 18db

 Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Case Protective Shell Metal Enclosure For Raspberry Pi 4 B Only

Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Case Protective Shell Metal Enclosure For Raspberry Pi 4 B Only

Secondly, there is another Raspberry Pi 4 Aluminum Alloy Metal Case with On Board Cooling Fan for Raspberry Pi 4 model B. This Pi 4 metal case is designed with many round cooling holes at the top and buttom cover of the case for good and fast heat dissipation. Also it is very light weight. There cooling fan is on the case installed, you just need to insert the cooling fan pin into the right GPIO pin of your Raspberry Pi 4B computer.

 Raspberry Pi 4 computer model B Aluminum Alloy Metal Case with Cooling Fan for Raspberry pi 4 model B

Raspberry Pi 4 computer model B Aluminum Alloy Metal Case with Cooling Fan for Raspberry pi 4 model B

Raspberry Pi 4 computer model B Aluminum Alloy Metal Case with Cooling Fan for Raspberry pi 4 model B

Raspberry Pi 4 computer model B Aluminum Alloy Metal Case with Cooling Fan for Raspberry pi 4 model B

 

Thirdly, there is a 9 layer acrylic case designed for Raspberry Pi 4, also it can install a cooling fan, we include a good quality DC 5V cooling fan also a Micro HDMI Male to HDMI Female Adapter included.

Raspberry Pi 4 Model B Case with Cooling Fan, Acrylic Cover Shell Box for Raspberry Pi 4 Computer Model B Only

Raspberry Pi 4 Model B Case with Cooling Fan, Acrylic Cover Shell Box for Raspberry Pi 4 Computer Model B Only

Raspberry Pi 4 Model B Case with Cooling Fan, Acrylic Cover Shell Box for Raspberry Pi 4 Computer Model B Only

This is a 9 layers acrylic case designed specifically for the Raspberry Pi 4 Model B, not for 3B+/3B;
It provides the best available protection/accessibility for the Raspberry Pi 4 Model B;
There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don't need to open the case.
Reserved ranked line hole for the camera, more convenient to use.
Wall mountable.

Raspberry Pi 4 Model B Acrylic Case with Cooling Fan Kit Installation Guide

 

Also a new design ABS case to protect your Raspberry Pi 4 Model B computer, and it is only comepatible with your Raspberry Pi 4 Model B, not support other versions. Also support install a dc 5v cooling fan. The GPIO pin interface is available to us if you do not install the cooling fan. Also with all ports and slots reserverd for Raspberry Pi 4B.

Later a new Raspberry Pi 4 metal case specially designed for the newest Raspberry Pi 4 Model B computer. It only supports the Raspberry Pi 4 Model B board. Cooling Fan installation is supported, You can also install the proper heatsinks on your Pi 4 for better heat dissaption . with all ports and slots match with Raspberry Pi 4B perfectly. also wall mountable, two VESA-standard mounting holes on the bottom of the metal case for hanging on the wall or somewhere you need.

 

Later there is a Raspberry Pi 4 aluminum case - ultra-thin aluminum alloy metal protective CNC Case that specially designed for Raspberry Pi 4 Model B, which compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB Versions, use this Pi 4 case you can have easy access to all ports and slots of your Raspberry Pi 4B. At the buttom of this pi 4 b case there are regular bump design not flat for better heat dissaption. It is a good raspberry pi 4 passive cooling case. We name is N300.

Raspberry Pi 4 Ultra-Thin CNC Aluminum Alloy Passive Cooling Case Compatible with Raspberry Pi 4 Model B Only (N300)

1 comment

  • Will you be creating a new USB jumper to allow the X830 and X850 boards to be used with the RPI4?

    Andy Barrow

Leave a comment


1 comment

  • Will you be creating a new USB jumper to allow the X830 and X850 boards to be used with the RPI4?

    Andy Barrow
Loading...

Your cart